Plumber or Restoration Company? How to Know Who to Call

Is it a Job for a Plumber or Gainesville Restoration Company?

When it comes to water leaks and other emergencies in your home, both plumbers and restoration companies work to repair the issue and prevent water damage. However, there are instances when a restoration company might be more suitable than a plumber and vice versa. At Maven Construction Group, we provide restoration of water damage Gainesville, FL, residents can trust.

Common Water Issues for Homeowners

  • Leaking Pipes: Leaking or cracked pipes can happen quite often and if not taken care of can cost you a significant amount on your water bill and even cause water damage to floors and walls. However, water leak detection is fairly easy and quick to spot, as well as to resolve, so it is often a job more suitable for a plumber as long as there is no extensive damage.
  • Clogged Drains: Clogged drains can cause water to spill over onto other areas, however, because it is easily noticed it will often be repaired before there is extensive water damage to the surrounding areas. A plumber would be the ideal choice for clogged drains.
  • Leaking Shower Pan: Leaking shower pans are not easily detected and due to the constant flow of water it is easy for water to damage floors and walls. The excess moisture often causes mold growth in the bathroom as well. For water issues involving mold damage restoration, a restoration company should be contacted.
  • Water Heater Burst: A water heater burst can release large amounts of water instantly, possibly flooding the surrounding areas and causing water damage. In this instance, a Gainesville restoration company would be necessary for emergency water removal and to repair the burst.
  • Slab Leaks: Slab leaks can cause serious structural problems to your home if not addressed. They can cause cracks in walls and flooring, extensive water damage to the foundation, mildew and mold growth, and raise your water bills significantly. A restoration company can help repair the leak and address any water or mold damages caused by it.

Restoration Company in Gainesville, FL

What makes water restoration companies different from plumbers is the gravity of the situation. Plumbers stop and repair the source of water loss but do not address water damage caused by it. Restoration companies, on the other hand, use advanced equipment to dry, remove and repair water damage as well as mold damage caused by the water source. At Maven Construction Group, we can also bring in a plumber to repair a leak or other water issue if needed and, unlike normal plumber services, the repairs would be covered under your insurance. Contact us today for all your water and mold restoration services.

Water Removal Gainesville Florida

When removing water from commercial and residential buildings you must understand the science of drying. The science of drying requires understanding of thermodynamic properties of air and water vapor mixtures. Measuring and evaluating these properties enables restorers to better analyze and manage conditions during drying. Rapid drying requires the proper equipment and understanding of the elements listed below.

Although equilibrium is not the primary goal in structural drying, the forces that continually seek this state are the same forces used to achieve drying goals. Managing psychrometric conditions influences the rate at which moisture moves from wet building materials to the air, when seeking equilibrium. The objective of drying is to minimize the amount of time materials spend in an abnormally wet state. This time can be reduced by better understanding the forces that move moisture through materials.

Evaporation is the transfer of moisture from water damaged building materials to the air. This can be achieved by rapid air-movement by using high velocity air-movers. When a building suffers from water damage the humidity inside the building goes up. Because of the the wet building materials inside, the moisture has no place to go once the materials are saturated. Elevated humidity levels means excess moisture in the air which leads to secondary water damaged building materials. For example, water may flood a building as a result of a plumbing malfunction but only go 6 to 12 inches up the drywall. The elevated moisture within the air-space of the building will rise causing wet air to damage upper cabinets and other building materials that were not actually touched by water. Elevated moisture levels or elevated Relative Humidity or (RH) can lead to mold contamination in areas of the dwelling that were not actually touched by water. The best way to reduce elevated (RH) is the installation of dehumidifiers. Dehumidification is the process of removing moisture from the air. In closed drying systems dehumidifcation is essential for removing evaporated moisture from the air to minimize or prevent secondary water damage.

Once structural drying is completed and the drying goal is achieved, inspection of damages is performed. Building materials such as drywall can lose structural integrity once damaged by water. Often times insurance companies think that drywall can be saved once dried however, if the structural integrity of the drywall has been compromised it should be replaced. Drywall is considered to be a porous and should always be removed if the category of water is 2 or 3 (which means it is an unclean source). Drywall that is contaminated with mold should always be removed no matter the situation.

Water Leak Detection Gainesville Florida

North Central Florida has chronic issues with hidden plumbing leaks, known as slab leaks,which are a failure of copper plumbing lines located within the foundation in residential and commercial buildings. Often times slab leaks can take 15-20 years to develop. Slab leaks will start off with a hole in the copper line so small it can’t be seen by the naked eye. Although small, slab leaks can cause serious water and mold damage to your property. They can go undetected for weeks, causing mold damage inside wall cavities and behind cabinets or under wood flooring. Mold typically thrives in damp, dark places like water damaged wall cavities. Slab leaks will often lead to mold damage.

Slab leaks are usually detected by homeowners when water bills are increased with out explanation. Often times homeowners will notice a wet spot in the middle of a room or a warm spot under a tile floor. Plumbing companies often lack the proper leak detection equipment needed to locate slab leaks. Leak detection for slab leaks is performed using specialty equipment such as thermal imaging devices, moisture detection devices and sonar guided listening devices. Using this specialty equipment to locate the leak, reduces demolition and damage to the property. Once the slab leak is located, a plumbing company can be contracted to repair the leak. Slab leak repair is often times covered by homeowners insurance policies and resulting water and mold damage from slab leaks are usually covered as well. Gainesville Leak Detection is owned and operated by the licensed General Contractors at MAVEN Construction Group. They locate hundreds of slab leaks every year in North Central Florida. If you have a hidden water leak call Gainesville Leak Detection at 352-246-8667.