Water damage can lead to mold contamination if ignored or not dried within 24-48 hours. Some water damages in Gainesville Florida happen quickly and are obvious, causing significant amounts of water. Others may happen slowly for longer periods of time going unnoticed. The presence of such uncontrolled water damage can allow mold to grow. Often times homes have hidden, slow plumbing leaks and the homeowner or building occupants are unaware of this damage for months. Slab leaks are example of hidden plumbing leaks which can lead to serious structural problems and mold growth.
Moisture from Construction: Moisture contained in the materials used to construct a building needs to be removed, by using drying materials, once construction has been completed. During the construction process building materials are often water damaged by rain and then installed and covered up before dried properly. Contractors are generally behind schedule due to rain delays which often times results in the use of wet building materials as they try to complete their project on time. This increases the chances of mold contamination within the home or building. Most building contractors have little to no understanding of psychrometrics which is the science of understanding how moisture behaves when it is a vapor contained in the air. The following defined terms must be understood for one to have a better understanding of psychrometrics.
Dry-bulb temperature: The temperature of air read on a standard thermometer.
Relative humidity: (RH) The ratio of moisture content in the air.
Specific humidity: The weight of water in each pound of dry air. Generally discussed in GPP (Grains Per Pound) of Dry Air.
Wet bulb temperature: The temperature of air read on a standard thermometer that is covered by wet wick and exposed to air moving across it at 1000 feet per minute.
Mold Growth Inside Buildings: Mold will begin to grow in and on building materials when humidity levels within the building reach 70 % or higher. This can result from water damaged building materials not being dried properly or HVAC system failure. When a building’s HVAC system is failing it can result in surface mold growth which can be remediated easily early on. Serious mold problems are usually the result of some form of water damage such as plumbing leaks or roof leaks which go ignored or are mishandled. Property management companies and condo associations in Gainesville Florida are known to ignore and mishandle water damage and mold damage. Property management companies are paid by property owners to minimize damages and cost and maximize profits, leaving building occupants at risk. Property management companies definition of mold remediation is covering mold contaminated drywall with paint or primer. Maintenance staff often perform these tasks with little to no knowledge about mold contamination and proper structural drying. Water damage is a very serious issue and many residents are living inside mold contaminated apartment buildings with little to no knowledge.
If you suspect you have mold in your residence, contact professionals who can help you identify and eliminate the problem. MAVEN Construction Group is a licensed General Contractor AND licensed Mold Remediator with over a decade of experience in handling water and mold related issues in residential and commercial buildings.